IPC/WHMA-A-620 CIS Certified IPC Specialist Training

IPC/WHMA-A-620 Requirements and Acceptance for Cable and Wire Harness Assembly Training. The only industry consensus standard training for Cable Wire and Harness Assemblies. IPC/WHMA-A-620 Training Includes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies.

Click here for further information about this course.

IPC-A-610 CIT Certified IPC Trainer Training

IPC-A-610 Acceptability of Electronic Assemblies. IPC-A-610 is the most widely used industry consensus electronics assembly Training in the world defining Accept and Defect criteria. A must for all quality assurance and assembly departments, IPC-A-610 Training illustrates industry-accepted criteria for electronics assemblies using theory information, photographs and illustrations. Topics include flex attachment, board in board, part on part, lead free, component orientation and soldering criteria for through-hole, Surface Mount, mechanical assembly, cleaning, marking, coating, and laminate requirements. IPC-A-610 Training is invaluable for all inspectors, operators and trainers.

Click here for further information on this training course.

IPC-A-620 Hands on Practical CIT/CIS Training

The IPC/WHMA-A-620 optional hands-on training has been developed to help users become more familiar with the basics of cable and wire harness assembly and fabrication.

The Hands-on module is optional for the CIT and CIS. If a CIT wishes to teach the hands-on projects, the CIT would need to complete the extra, 1-day course and complete all the requirements of the projects.

The CIS hands-on training is modular and can be applied to the individual, modular sections of the CIS training. The CIS candidate would need to complete the lecture/discrimination module for his or her certification. Then the CIS candidate would complete only the portion of the hands-on project that applies to the learned material.

Click here for further information about this course.

J-STD-001 CIT Re-Certification Certified IPC Trainer Training

IPC-J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies. The sole industry consensus standard training covering electronic assemblies, Soldering, J-STD-001 is recognized globally for its criteria on soldering processes and materials. Updated with participants from 18 countries providing input and expertise, this theory and practical training brings the latest criteria along with new information to ease its use and comprehension. This is a must-have for those in the electronics industry with an interest in the process and acceptance criteria for electrical and electronic assemblies.

Click here for further information on this training course.

IPC/WHMA-A-620 CIT Re-Certification Certified IPC Trainer

IPC/WHMA-A-620 Requirements and Acceptance for Cable and Wire Harness Assembly Training. The only industry consensus standard training for Cable Wire and Harness Assemblies. IPC/WHMA-A-620 Training Includes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies.

Click here for further information about this course.

IPC-6012 CIT/CIS Certified Training

IPC-6012 Training covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. IPC-6012 also addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as electrical, mechanical and environmental requirements.

Click here for further information about this course.

IPC CID+ Enhanced Certified Interconnect Design Training

IPC CID+ is a professional development program providing training in objective evaluation of core competencies in PCB design, based upon industry standards rather than specifications of just one company. Courses enhance and assess technical knowledge: how to transform an electrical circuit description into a PCB design that can be manufactured, assembled and tested.

IPC CID+ (Advanced) is a valuable professional credential recognized throughout the electronics industry. This technical training holds the most benefit for PCB designers with at least 2 years of hands-on experience. Because Designer Certification builds a foundation in design decision-making and practical application of IPC standards, the program is open to all engineering staff and managers with interest in design: Sales, Purchasing, R&D, Quality, Test.

Click here for further information on the training course.

IPC/WHMA-A-620 Space Certified IPC Training CIT/CIS

IPC/WHMA-A-620-S Space Addendum provides additional requirements to IPC/WHMA-A-620 to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. The IPC/WHMA-A-620-S Space Addendum cannot be used as a stand alone document, it must be used with the base standard IPC/WHMA-A-620. Click here for further information on this training course

IPC-CID Certified Interconnect Design

IPC CID is a professional development program providing training in objective evaluation of core competencies in PCB design, based upon industry standards rather than specifications of just one company. Courses enhance and assess technical knowledge: how to transform an electrical circuit description into a PCB design that can be manufactured, assembled and tested.

IPC CID  is a valuable professional credential recognized throughout the electronics industry. This technical training holds the most benefit for PCB designers with at least 2 years of hands-on experience. Because Designer Certification builds a foundation in design decision-making and practical application of IPC standards, the program is open to all engineering staff and managers with interest in design: Sales, Purchasing, R&D, Quality, Test.

Click here for further information on the training course.