IPC 7711/21 is a procedures guide required to rework, modify and repair printed boards and electronic assemblies.
This training programme teaches individuals industry approved techniques that are reliable, repeatable and safe. Reducing the cost of potentially scrapping or out sourcing assemblies.
CIT and CSE Certifications require all above modules to be completed. Upon course completion students receive an industry recognised, traceable certification valid for two years.
Upon course completion students receive an industry recognised, traceable certification valid for two years.
CIT: 5 days
CIS: 4 days for all modules
CSE: 5 days
Please contact A.R.T. for training dates or check our calendar for dates.
Please fill out the pop-up form with your details so we can get the course booked in, if you have any issues please contact our team.
Thank you %NAME% for submitting the course enquiry form, you can return to our site by going to this link: https://rework.co.uk/
We faced problems while connecting to the server or receiving data from the server. Please wait for a few seconds and try again.
If the problem persists, then check your internet connectivity. If all other sites open fine, then please contact the administrator of this website with the following information.
TextStatus: undefined
HTTP Error: undefined
Some error has occured.
Past and Future Events
All
Only Past Events
Only Future Events
04decAll Day05IPC-A-610 CIT Re-Certification Certified IPC Trainer Training
IPC-A-610 CIT Re-Certification Certified IPC Trainer Training IPC-A-610 Acceptability of Electronic Assemblies. IPC-A-610 is the most widely used industry consensus electronics assembly Training in the world defining Accept and Defect criteria.
IPC-A-610 Acceptability of Electronic Assemblies. IPC-A-610 is the most widely used industry consensus electronics assembly Training in the world defining Accept and Defect criteria. A must for all quality assurance and assembly departments, IPC-A-610 Training illustrates industry-accepted criteria for electronics assemblies using theory information, photographs and illustrations. Topics include flex attachment, board in board, part on part, lead free, component orientation and soldering criteria for through-hole, Surface Mount, mechanical assembly, cleaning, marking, coating, and laminate requirements. IPC-A-610 Training is invaluable for all inspectors, operators and trainers.
Click here for further information on the training course.
more
december 4 (Monday) - 5 (Tuesday)
04decAll Day08J-STD-001 CIT Certified IPC Trainer Training
J-STD-001 CIT Certified IPC Trainer Training IPC-J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies. The sole industry consensus standard training covering electronic assemblies, Soldering, J-STD-001 is recognized globally for its criteria
IPC-J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies. The sole industry consensus standard training covering electronic assemblies, Soldering, J-STD-001 is recognized globally for its criteria on soldering processes and materials. Updated with participants from 18 countries providing input and expertise, this theory and practical training brings the latest criteria along with new information to ease its use and comprehension. This is a must-have for those in the electronics industry with an interest in the process and acceptance criteria for electrical and electronic assemblies.
Click here for further information on this training course.
more
december 4 (Monday) - 8 (Friday)
06decAll Day07IPC/WHMA-A-620 CIT Re-Certification Certified IPC Trainer
IPC/WHMA-A-620 CIT Re-Certification Certified IPC Trainer IPC/WHMA-A-620 Requirements and Acceptance for Cable and Wire Harness Assembly Training. The only industry consensus standard training for Cable Wire and Harness Assemblies. IPC/WHMA-A-620 Training
IPC/WHMA-A-620 Requirements and Acceptance for Cable and Wire Harness Assembly Training. The only industry consensus standard training for Cable Wire and Harness Assemblies. IPC/WHMA-A-620 Training Includes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies.
Click here for further information about this course.
more
december 6 (Wednesday) - 7 (Thursday)
11decAll Day12J-STD-001 CIT Re-Certification Certified IPC Trainer Training
J-STD-001 CIT Re-Certification Certified IPC Trainer Training IPC-J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies. The sole industry consensus standard training covering electronic assemblies, Soldering, J-STD-001 is recognized globally for its
IPC-J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies. The sole industry consensus standard training covering electronic assemblies, Soldering, J-STD-001 is recognized globally for its criteria on soldering processes and materials. Updated with participants from 18 countries providing input and expertise, this theory and practical training brings the latest criteria along with new information to ease its use and comprehension. This is a must-have for those in the electronics industry with an interest in the process and acceptance criteria for electrical and electronic assemblies.
Click here for further information on this training course.
more
december 11 (Monday) - 12 (Tuesday)
08janAll Day11IPC-A-610 CIT Certified IPC Trainer Training
IPC-A-610 CIT Certified IPC Trainer Training IPC-A-610 Acceptability of Electronic Assemblies. IPC-A-610 is the most widely used industry consensus electronics assembly Training in the world defining Accept and Defect criteria. A
IPC-A-610 Acceptability of Electronic Assemblies. IPC-A-610 is the most widely used industry consensus electronics assembly Training in the world defining Accept and Defect criteria. A must for all quality assurance and assembly departments, IPC-A-610 Training illustrates industry-accepted criteria for electronics assemblies using theory information, photographs and illustrations. Topics include flex attachment, board in board, part on part, lead free, component orientation and soldering criteria for through-hole, Surface Mount, mechanical assembly, cleaning, marking, coating, and laminate requirements. IPC-A-610 Training is invaluable for all inspectors, operators and trainers.
Click here for further information on this training course.
more
january 8 (Monday) - 11 (Thursday)
08janAll Day12J-STD-001 CIS Certified IPC Specialist Training
J-STD-001 CIS Certified IPC Specialist Training IPC-J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies. The sole industry consensus standard training covering electronic assemblies, Soldering, J-STD-001 is recognized globally for its criteria
IPC-J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies. The sole industry consensus standard training covering electronic assemblies, Soldering, J-STD-001 is recognized globally for its criteria on soldering processes and materials. Updated with participants from 18 countries providing input and expertise, this theory and practical training brings the latest criteria along with new information to ease its use and comprehension. This is a must-have for those in the electronics industry with an interest in the process and acceptance criteria for electrical and electronic assemblies.
Click here for further information on this training course.
more
january 8 (Monday) - 12 (Friday)
22janAll Day25IPC-6012 CIT/CIS Certified Training
IPC-6012 CIT/CIS Certified Training IPC-6012 Training covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core
IPC-6012 Training covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. IPC-6012 also addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as electrical, mechanical and environmental requirements.
Click here for further information about this course.
more
january 22 (Monday) - 25 (Thursday)
22janAll Day26IPC-7711/7721 CIT/CIS Certified IPC Training
IPC-7711/7721 CIT/CIS Certified IPC Training IPC 7711/7721 Rework, Modification and Repair of Electronic Assemblies. Incorporating both theory and practical training for Repair and Rework of Electronic Assemblies and Printed Circuit Boards.
IPC 7711/7721 Rework, Modification and Repair of Electronic Assemblies. Incorporating both theory and practical training for Repair and Rework of Electronic Assemblies and Printed Circuit Boards. Including installation and removal of components. Pad and track repair. Applicable to both Lead and Lead Free solders.
Click here for further information about this training course.
january 22 (Monday) - 26 (Friday)
29janAll Day01febIPC/WHMA-A-620 CIS Certified IPC Specialist Training
IPC/WHMA-A-620 CIS Certified IPC Specialist Training IPC/WHMA-A-620 Requirements and Acceptance for Cable and Wire Harness Assembly Training. The only industry consensus standard training for Cable Wire and Harness Assemblies. IPC/WHMA-A-620 Training
IPC/WHMA-A-620 Requirements and Acceptance for Cable and Wire Harness Assembly Training. The only industry consensus standard training for Cable Wire and Harness Assemblies. IPC/WHMA-A-620 Training Includes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies.
Click here for further information about this course.
more
January 29 (Monday) - February 1 (Thursday)
29janAll Day02febIPC-A-620 Space Addendum Training CIT/CIS
IPC/WHMA-A-620 Space Certified IPC Training CIT/CIS IPC/WHMA-A-620-S Space Addendum provides additional requirements to IPC/WHMA-A-620 to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal
IPC/WHMA-A-620-S Space Addendum provides additional requirements to IPC/WHMA-A-620 to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. The IPC/WHMA-A-620-S Space Addendum cannot be used as a stand alone document, it must be used with the base standard IPC/WHMA-A-620. Click here for further information on this training course
more
January 29 (Monday) - February 2 (Friday)
12febAll Day14IPC-CID Certified Interconnect Design
IPC-CID Certified Interconnect Design IPC CID is a professional development program providing training in objective evaluation of core competencies in PCB design, based upon industry standards rather than specifications of just
IPC CID is a professional development program providing training in objective evaluation of core competencies in PCB design, based upon industry standards rather than specifications of just one company. Courses enhance and assess technical knowledge: how to transform an electrical circuit description into a PCB design that can be manufactured, assembled and tested.
IPC CIDÂ is a valuable professional credential recognized throughout the electronics industry. This technical training holds the most benefit for PCB designers with at least 2 years of hands-on experience. Because Designer Certification builds a foundation in design decision-making and practical application of IPC standards, the program is open to all engineering staff and managers with interest in design: Sales, Purchasing, R&D, Quality, Test.
Click here for further information on the training course.
more
february 12 (Monday) - 14 (Wednesday)
25marAll Day27IPC CID+ Enhanced Certified Interconnect Design Training
IPC CID+ Enhanced Certified Interconnect Design Training IPC CID+ is a professional development program providing training in objective evaluation of core competencies in PCB design, based upon industry standards rather than
IPC CID+ is a professional development program providing training in objective evaluation of core competencies in PCB design, based upon industry standards rather than specifications of just one company. Courses enhance and assess technical knowledge: how to transform an electrical circuit description into a PCB design that can be manufactured, assembled and tested.
IPC CID+ (Advanced) is a valuable professional credential recognized throughout the electronics industry. This technical training holds the most benefit for PCB designers with at least 2 years of hands-on experience. Because Designer Certification builds a foundation in design decision-making and practical application of IPC standards, the program is open to all engineering staff and managers with interest in design: Sales, Purchasing, R&D, Quality, Test.
Click here for further information on the training course.
more
march 25 (Monday) - 27 (Wednesday)
 23 Eastways, Eastways, Witham, Essex, CM8 3YQ United Kingdom. SatNav CM83AL
Mon – Fri: 8:30am – 5pm
Saturday: Closed
Sunday: Closed
*Online shop open 24/7
© 2023 Advanced Rework Technology. All Rights Reserved | Registered in England and Wales Reg. No. 5037243 | V.A.T Reg. No. 529 3381 33
WEB DESIGN BY 
