The IPC 6012 standard establishes and defines the Qualification and Performance requirements for the Fabrication of Rigid Printed Boards.
The industry developed training programme incorporates content from both IPC 6012 and IPC-A-600 that gives companies and individuals all the tools they require to increase skills and performance.
This training is a theoretical course that is suitable for any person who is responsible for Quality and reliability PCBs.
CIT and CSE Certifications require all above sessions to be completed. Upon course completion students receive an industry recognised, traceable certification valid for two years.
Upon course completion students receive an industry recognised, traceable certification valid for two years.Â
3.5 days for all levels of training.
Please contact A.R.T. for training dates or check our calendar for dates.
Please fill out the pop-up form with your details so we can get the course booked in, if you have any issues please contact our team.
Thank you %NAME% for submitting the course enquiry form, you can return to our site by going to this link: https://rework.co.uk/
We faced problems while connecting to the server or receiving data from the server. Please wait for a few seconds and try again.
If the problem persists, then check your internet connectivity. If all other sites open fine, then please contact the administrator of this website with the following information.
TextStatus: undefined
HTTP Error: undefined
Some error has occured.
02aprAll Day04IPC-A-600 CIT/CIS Certified Training
IPC-A-600 CIT/CIS Certified Training IPC-A-600 is the definitive Training for printed board acceptability. IPC-A-600 Training incorporates photographs and illustrations of the target, acceptable and nonconforming conditions that are either internally or
IPC-A-600 is the definitive Training for printed board acceptability. IPC-A-600 Training incorporates photographs and illustrations of the target, acceptable and nonconforming conditions that are either internally or externally observable on bare printed boards. The training synchronizes criteria to the acceptability requirements expressed in IPC-6012 and IPC-6013.
Click here for further information about this course.
more
April 2, 2024 - April 4, 2024 (All Day)(GMT+00:00)
02aprAll Day05IPC-A-610 CIT Certified IPC Trainer Training
IPC-A-610 CIT Certified IPC Trainer Training IPC-A-610 Acceptability of Electronic Assemblies. IPC-A-610 is the most widely used industry consensus electronics assembly Training in the world defining Accept and Defect criteria. A
IPC-A-610 Acceptability of Electronic Assemblies. IPC-A-610 is the most widely used industry consensus electronics assembly Training in the world defining Accept and Defect criteria. A must for all quality assurance and assembly departments, IPC-A-610 Training illustrates industry-accepted criteria for electronics assemblies using theory information, photographs and illustrations. Topics include flex attachment, board in board, part on part, lead free, component orientation and soldering criteria for through-hole, Surface Mount, mechanical assembly, cleaning, marking, coating, and laminate requirements. IPC-A-610 Training is invaluable for all inspectors, operators and trainers.
Click here for further information on this training course.
more
April 2, 2024 - April 5, 2024 (All Day)(GMT+00:00)
08aprAll Day09IPC-A-610 CIT Re-Certification Certified IPC Trainer Training
IPC-A-610 CIT Re-Certification Certified IPC Trainer Training IPC-A-610 Acceptability of Electronic Assemblies. IPC-A-610 is the most widely used industry consensus electronics assembly Training in the world defining Accept and Defect criteria.
IPC-A-610 Acceptability of Electronic Assemblies. IPC-A-610 is the most widely used industry consensus electronics assembly Training in the world defining Accept and Defect criteria. A must for all quality assurance and assembly departments, IPC-A-610 Training illustrates industry-accepted criteria for electronics assemblies using theory information, photographs and illustrations. Topics include flex attachment, board in board, part on part, lead free, component orientation and soldering criteria for through-hole, Surface Mount, mechanical assembly, cleaning, marking, coating, and laminate requirements. IPC-A-610 Training is invaluable for all inspectors, operators and trainers.
Click here for further information on the training course.
more
April 8, 2024 - April 9, 2024 (All Day)(GMT+00:00)
08aprAll Day11IPC/WHMA-A-620 CIS Certified IPC Specialist Training
IPC/WHMA-A-620 CIS Certified IPC Specialist Training IPC/WHMA-A-620 Requirements and Acceptance for Cable and Wire Harness Assembly Training. The only industry consensus standard training for Cable Wire and Harness Assemblies. IPC/WHMA-A-620 Training
IPC/WHMA-A-620 Requirements and Acceptance for Cable and Wire Harness Assembly Training. The only industry consensus standard training for Cable Wire and Harness Assemblies. IPC/WHMA-A-620 Training Includes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies.
Click here for further information about this course.
more
April 8, 2024 - April 11, 2024 (All Day)(GMT+00:00)
13mayAll Day16IPC/WHMA-A-620 CIT Certified IPC Trainer Training
IPC/WHMA-A-620 CIT Certified IPC Trainer Training IPC/WHMA-A-620 Requirements and Acceptance for Cable and Wire Harness Assembly Training. The only industry consensus standard training for Cable Wire and Harness Assemblies. IPC/WHMA-A-620Â Training Includes
IPC/WHMA-A-620 Requirements and Acceptance for Cable and Wire Harness Assembly Training. The only industry consensus standard training for Cable Wire and Harness Assemblies. IPC/WHMA-A-620Â Training Includes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies.
Click here for further information about this course.
more
May 13, 2024 - May 16, 2024 (All Day)(GMT-11:00)
20mayAll Day24IPC-A-620 Space Addendum Training CIT/CIS
IPC/WHMA-A-620 Space Certified IPC Training CIT/CIS IPC/WHMA-A-620-S Space Addendum provides additional requirements to IPC/WHMA-A-620 to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal
IPC/WHMA-A-620-S Space Addendum provides additional requirements to IPC/WHMA-A-620 to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal cyclic environments getting to and operating in space. The IPC/WHMA-A-620-S Space Addendum cannot be used as a stand alone document, it must be used with the base standard IPC/WHMA-A-620. Click here for further information on this training course
more
May 20, 2024 - May 24, 2024 (All Day)(GMT+00:00)
20mayAll Day24J-STD-001 CIT Certified IPC Trainer Training
J-STD-001 CIT Certified IPC Trainer Training IPC-J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies. The sole industry consensus standard training covering electronic assemblies, Soldering, J-STD-001 is recognized globally for its criteria
IPC-J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies. The sole industry consensus standard training covering electronic assemblies, Soldering, J-STD-001 is recognized globally for its criteria on soldering processes and materials. Updated with participants from 18 countries providing input and expertise, this theory and practical training brings the latest criteria along with new information to ease its use and comprehension. This is a must-have for those in the electronics industry with an interest in the process and acceptance criteria for electrical and electronic assemblies.
Click here for further information on this training course.
more
May 20, 2024 - May 24, 2024 (All Day)(GMT+00:00)
10junAll Day12IPC-CID Certified Interconnect Design
IPC-CID Certified Interconnect Design IPC CID is a professional development program providing training in objective evaluation of core competencies in PCB design, based upon industry standards rather than specifications of just
IPC CID is a professional development program providing training in objective evaluation of core competencies in PCB design, based upon industry standards rather than specifications of just one company. Courses enhance and assess technical knowledge: how to transform an electrical circuit description into a PCB design that can be manufactured, assembled and tested.
IPC CIDÂ is a valuable professional credential recognized throughout the electronics industry. This technical training holds the most benefit for PCB designers with at least 2 years of hands-on experience. Because Designer Certification builds a foundation in design decision-making and practical application of IPC standards, the program is open to all engineering staff and managers with interest in design: Sales, Purchasing, R&D, Quality, Test.
Click here for further information on the training course.
more
June 10, 2024 - June 12, 2024 (All Day)(GMT+00:00)
17junAll Day21J-STD-001 CIS Certified IPC Specialist Training
J-STD-001 CIS Certified IPC Specialist Training IPC-J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies. The sole industry consensus standard training covering electronic assemblies, Soldering, J-STD-001 is recognized globally for its criteria
IPC-J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies. The sole industry consensus standard training covering electronic assemblies, Soldering, J-STD-001 is recognized globally for its criteria on soldering processes and materials. Updated with participants from 18 countries providing input and expertise, this theory and practical training brings the latest criteria along with new information to ease its use and comprehension. This is a must-have for those in the electronics industry with an interest in the process and acceptance criteria for electrical and electronic assemblies.
Click here for further information on this training course.
more
June 17, 2024 - June 21, 2024 (All Day)(GMT-11:00)
23sepAll Day25IPC CID+ Enhanced Certified Interconnect Design Training
IPC CID+ Enhanced Certified Interconnect Design Training IPC CID+ is a professional development program providing training in objective evaluation of core competencies in PCB design, based upon industry standards rather than
IPC CID+ is a professional development program providing training in objective evaluation of core competencies in PCB design, based upon industry standards rather than specifications of just one company. Courses enhance and assess technical knowledge: how to transform an electrical circuit description into a PCB design that can be manufactured, assembled and tested.
IPC CID+ (Advanced) is a valuable professional credential recognized throughout the electronics industry. This technical training holds the most benefit for PCB designers with at least 2 years of hands-on experience. Because Designer Certification builds a foundation in design decision-making and practical application of IPC standards, the program is open to all engineering staff and managers with interest in design: Sales, Purchasing, R&D, Quality, Test.
Click here for further information on the training course.
more
September 23, 2024 - September 25, 2024 (All Day)(GMT+00:00)
 23 Eastways, Eastways, Witham, Essex, CM8 3YQ United Kingdom. SatNav CM83AL
Mon – Fri: 8:30am – 5pm
Saturday: Closed
Sunday: Closed
*Online shop open 24/7
© 2024 Advanced Rework Technology. All Rights Reserved | Registered in England and Wales Reg. No. 5037243 | V.A.T Reg. No. 529 3381 33
WEB DESIGN BY 
