Latest News - Advanced Rework Technology Ltd.
IPC CID Certified Interconnect Design Course now available. Next Course 12th - 14th June 2017. Contact us for any information.

Latest News

art panel background

Southern Manufacturing 2015

Once again Advanced Rework Technology Ltd will be exhibiting at Southern Manufacturing and Electronics where we will be promoting the new Revision F of the IPC-A-610 Acceptability of Electronic Assemblies and IPC J-STD 001 Requirements for Soldered Electrical and Electronic Assemblies. ART Ltd will have two Master IPC Trainers on the stand who are considered …

State-of-the-ART training pays off for competition winners

The National Electronics Week exhibition in Birmingham hosted the first IPC Hand Soldering competition to be held in the UK. All three winners in the recently held IPC Hand Soldering Competition are employed by companies trained by Advanced Rework Technology Ltd-ART Ltd Both first and second place winners in the recently held IPC Hand Soldering …

National Electronics Week ‘State of the ART seminars’

Call for papers for the ‘State of the ART seminars’ at the National Electronics Week to be held at the NEC Birmingham 8-10 April 1014 Advanced Rework Technology Ltd is, once again, hosting the ‘State of the ART seminars’ at NEW 2014. Speakers who wish to present a paper are requested to contact debbie@rework.co.uk with an …

Customer Recommendation for the adoption of IPC Standards

Why the IPC. Here at SGX Sensortech (M.A) Ltd we pride ourselves in delivering a reliable high quality product. We are always looking to improve and adapt to better, more cost effective methods. Early 2010 it became apparent that our first time pass rate from our subcontractors was not as efficient as it could possibly …

IPC/WHMA-620 Revision B Beta Course

Advanced Rework Technology Ltd will be holding an international Beta training class on the 4-7 february 2013. NEW! Includes greatly expanded criteria for molding, potting, splicing, crimp without insulation support, conformable cable etc. The IPC/WHMA-A-620 remains the only industry-consensus standard for Requirments and Acceptance of Cable and Wire harness Assemblies. The IPC and the wire harness …

IPC-A-600 CIT- What a success!

Advanced Rework Technology Ltd ran their first IPC-A-600 Certified IPC Trainer class 30th October-1st November and what a great success it was! All delegates from this training course were extremely happy with the outcome of their training.  One delegate commented “The IPC-A-600 training for me was very informative and a worthwhile course which will benefit …

New revision of IPC/WHMA-A-620 now available

Benefit from Hundreds of Enhancements in the Revised Cable and Wire Harness Assemblies Standard! Significant technical additions and updates, greater ease-of-use, and compatibility with other key assembly standards are among the many changes you will find in the newly released B revision of IPC/WHMA-A-620, Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC and …

Only A Few Weeks Left

Only a few weeks left to the first IPC-A-600 CIT course that will be held at Advanced Rework Technology Ltd on the 30th October-1st November. ART Ltd only have a few places left on this first course to be run for CIT’s so hurry hurry times running out.

IPC-A 600 Training Course to CIT

Advanced Rework Technology will be running their first IPC 600 course for trainer on the 30 October- 1 November. This training is a theoretical course which is suitable for any person who is responsible for quality and reliability of Printed Circuit Boards. The fees for the training will be £1,200 per person, included in the cost …

IPC MidWest

Advanced Rework Technology will be sending two of their IPC master trainers to the IPC Midwest exhibtion & conference 22-23 August to be held at the Renaissance Schaumburg Convention Centre Hotel Schaumburg. The trainers Debbie Wade and John Vickers will be attending the standards development meeting, which will include the Wire Harness Acceptability Task Group. …

Advanced Rework Technology IPC 600 Certification Centre.

Advanced Rework Technology Ltd has for many years offered the IPC A 600 Acceptability of Printed Boards at Certified IPC Application Specialist level. Due to customer demand A.R.T have now become Master Training Centre for the IPC A 600 which allows us to train to the Certified IPC Trainer level, this will allow the trainers …

J-STD-001 Space Addendum Training

Since the availability of the J-STD-001 Space Electronics Hardware Addendum many companies have attended the one day optional module 6 to the IPC’s J-STD-001 Instructor Training. This training has benefited companies who have contracts to build and supply Electronic assemblies that must survive the vibration and thermal cyclic environments experience while travelling and operation in …

Expanding to meet customer demand

Due to the increasing demand for IPC training, ART have employed a new Master IPC Trainer John Vickers. Susan Morris, Training Director of ART said in the short time John has been with us “He’s fitted in very well and is a great asset to the company”.